SMART Board In-WallRear Projection Interactive Whiteboard, Руководство по установке

Страница: 24 / 69

18 Installing Your Interactive Whiteboard
4. Align the opening of the mirror stand horizontally with the installed screen. Using the wall
brackets as your guide, lift or push at the bottom sides to center the mirror stand between the
brackets.
– For the 2865, the maximum distance between the lower cabinet of the mirror stand and
the wall surface upon which you mount the interactive whiteboard is 3 1/4" (8.3 cm).
– For the 2965, you must allow at least 15" (38.1 cm) between the lower cabinet of the
mirror stand and the wall surface upon which the interactive whiteboard is mounted.
5. Align the mirror stand vertically behind the installed screen by adjusting the leveling legs.
Raise the mirror stand so that the front opening is the same distance from the top edge of the
screen as it is from the bottom edge. Depending on your installation, the leveling legs may
raise the casters approximately 1/2" (1.3 cm) from the floor.
1. Remove a jam nut from another leg using a 15/16" flat or adjustable wrench.
2. Raise the jam nut on the front leg you’re adjusting, leaving just enough space on the leg for the
nut you removed in step 1.
3. Place the jam nut that you removed in step 1 on the leg and rotate it downward until it touches
the first jam nut.
4. Grip each nut with a 15/16" flat or adjustable wrench and forcibly turn the wrenches in opposite
directions to jam the two nuts together.
Together, the leg and nuts form a single, rigid unit.
To adjust the front legs of a 2865
Jam Nut
First Jam Nut
Second Jam Nut