SMA sunny boy 2000hf-us, Руководство по установке

Страница: 34 / 112

Configuring the Sunny Boy SMA America, LLC
34 SB20_25_30HFUS-eng-IUS113711 Installation Guide
5.2.2 Configuration for Bluetooth communication
Communication via Bluetooth with a communication device is activated as standard. Networking via
Bluetooth with other inverters is deactivated as a delivery condition.
The following configuration settings are possible via a rotary switch (switch C):
In order to restrict communication via Bluetooth between the inverters of your system and those of
neighboring systems, you can assign an individual NetID to the inverters of your system (switch
position 2 ... F). This, however, is only necessary if neighboring systems are to be found within a radius
of 1 640 ft. (500 m).
To ensure that all inverters in your system are detected by your communication device, all inverters
must have the same NetID. To assign a NetID, proceed as follows:
1. Set the arrow on the right rotary switch (C) using a
screw driver of width
1
⁄
8
in. (2.5 mm).
Switch position (NetID) Setting
0 Off
1 Communication via Bluetooth with communication device possible, no
networking with other inverters (factory setting)
2 ... F Networking with other inverters
DANGER
High voltages in the inverter. Death or serious injury due to electric shock.
If you have already connected the Quick Module to the Sunny Boy, carry out the following
steps.
• Switch off the line circuit breaker and secure it against being reactivated.
• If a multi-function relay is present, disconnect the multi-function relay power supply.
Acceptance of the settings
The Bluetooth settings will first be accepted upon commissioning.