SMA SB 4200TL HC, Руководство по установке

Страница: 39 / 64

SMA Technologie AG Technical Data
Installation Guide SBTLHCMS-IEN080411 Page39
Default Used for setting the country-specific information.
GER/VDE0126-1-1: Country-specific parameter settings for Ger-
many in accordance with DIN VDE 0126-1-1
GB: Country-specific parameter settings for Great Britain
IT: Country-specific parameter settings for Italy
Other: Here, parameter settings can be defined for countries for
which no predefined setting exists.
Trimmed: If country-specific parameters have been changed,
"trimmed" is shown in the display.
dFac-Max Maximum "mains frequency change" before the mains monitor-
ing system disconnects the device from the mains supply.
dZac-Max Maximum "grid impedance change" before the grid monitoring
system disconnects the device from the grid.
E_Total Total energy yield for the inverter. This change may be neces-
sary when you exchange the Sunny Boy and want to use the
data from the old device.
Fac-delta- Maximum frequency, above (Fac-delta+) and below (Fac-delta-)
the mains frequency, before the mains monitoring system discon-
nects the device from the mains supply.
Fac-delta+
Fac-Tavg Averaging time of grid frequency gaging
Firmware-BFR Firmware version of the operation control unit (BFR)
Firmware-DC-BFR Firmware version of the DC operation control unit (DC-BFR)
FirmwareSRR Firmware version of the current control unit (SRR)
h_Total Total hours of operation for the inverter. This change may be
necessary when you exchange the Sunny Boy and want to use
the data from the old device.
Hardware-DC-BFS Hardware version of the DC operation control unit (DC-BFR)
Inst.-Code Parameters for self contained power system recognition can only
be changed after entering the SMA grid guard password.
Name Explanation