SMA CP-JP Series, Руководство по установке

Страница: 15 / 28

6 Mounting SMA Solar Technology AG
Installation Manual 15 SCCP-JP_NR-IA-en-11
Requirement:
☐ The additionally required mounting material must be available (see Section 5.1, page 13).
Procedure:
1.
DANGER
Danger to life from electric shock due to live voltage
Prior to performing any work on the inverter, disconnect it from voltage sources (see inverter installation
manual).
2. Remove all screws of the kick plates (TX 30). Retain the screws for
subsequent mounting of the new kick plates.
3. Remove kick plates.
4. Dispose of the kick plates in accordance with the locally applicable disposal regulations.
6.3 Removing the Existing Ventilation Plate
1. Pull the ventilation plate forwards out of the base area of the
inverter cabinet. Grip underneath the ventilation plate and press
the middle part up while pulling it out.
2. Dispose of the ventilation plate.
6.4 Disassembling the Rear Panel
A
Figure 5: Position of the rear panel to be disassembled
Position Designation
A Rear panel to be disassembled