SMA CP-JP Series, Руководство по установке

Страница: 17 / 28

6 Mounting SMA Solar Technology AG
Installation Manual 17 SCCP-JP_NR-IA-en-11
6.
NOTICE
Property damage due to grounding cable being ripped out
The rear panel of the inverter and the switch cabinet are connected via a grounding cable. If the rear panel is
removed without due care, the grounding cable could be ripped off and the inverter damaged.
• Use a wrench to release the grounding cable from the
rear panel before removing the rear panel (AF 13).
7. Remove the rear panel and store it.
6.5 Mounting the New Rear Panel
Requirements:
☐ Two persons must be available for disassembling the rear panel.
☐ The required mounting material must be available (see Section 5.1, page 13).
☐ The inverter must be sufficiently protected from inclement weather.
CAUTION
Danger of crushing caused by heavy, bulky rear panel
The rear panel of the inverter is heavy and bulky. Danger of crushing when the rear panel slips off or tilts Weight of
the roof: 20 kg.
• Wear suitable personal protective equipment for all work on the product.
• Always have two persons disassemble and mount the rear panel.
Procedure:
1. Position the new rear panel in front of the inverter opening and
secure it to prevent it from tipping over.
2. Apply metal-free all-purpose paste to the rear-panel bolt for mounting the grounding cable.