SMA CP-JP Series, Руководство по установке

Страница: 14 / 28

6 Mounting SMA Solar Technology AG
Installation Manual SCCP-JP_NR-IA-en-11 14
6 Mounting
6.1 Safety during Mounting
NOTICE
Property damage due to dust intrusion and moisture penetration
During assembly work, the inverter is not sufficiently protected against moisture and dust. If the assembly work is
carried out during rainfall or in a dusty environment, moisture or dust can penetrate the inverter. Dust or moisture
intrusion can damage the product and impair its functionality.
• Do not open the enclosure during rainfall or when humidity exceeds the specified thresholds. The humidity
thresholds are: 15 % to 95 %.
• Only perform assembly work when the environment is dry and free of dust.
NOTICE
Inverter failure due to improper storage of the enclosure parts
Seals are to be found on the rear side of the enclosure parts. The seals can be damaged if the enclosure parts are
incorrectly stored. Weatherproofing of the inverter may be compromised if the seals are damaged. Dust and
moisture can penetrate the inverter.
• Store the enclosure parts properly.
• Replace damaged seals.
6.2 Disassembling the Kick Plates
The kick plates are mounted at the front and rear of the inverter.
A
B
Figure 4: Position of the kick plates
Position Designation
A Front kick plate on the inverter
B Rear kick plate on the inverter