manualshive.com logo in svg

SMA CLCON-10, Руководство по установке

Поделиться
Скачать
SMA CLCON-10 Скачать руководство пользователя страница 6

1 Information on this Document

1.1

Validity

This document is valid for the SMA Cluster Controller (models "CLCON-10" and "CLCON-S-10")
from hardware version A1 and from firmware version 1.03.xx.R.

1.2

Target group

The tasks described in this document must only be performed by qualified persons. Qualified
persons must have the following skills:

• Training in the installation and configuration of IT systems
• Knowledge of how an inverter works and is operated
• Training in how to deal with the dangers and risks associated with installing and using

electrical devices and installations

• Training in the installation and commissioning of electrical devices and installations
• Knowledge of the applicable standards and directives
• Knowledge of and compliance with this document and all safety information

1.3

Additional Information

Links to additional information can be found at www.SMA-Solar.com:

Document title

Document type

"SMA SPEEDWIRE FIELDBUS"

Technical Information

1.4

Symbols

Symbol

Explanation

Indicates a hazardous situation which, if not avoided, will result in
death or serious injury
Indicates a hazardous situation which, if not avoided, can result in
death or serious injury
Indicates a hazardous situation which, if not avoided, can result in
minor or moderate injury
Indicates a situation which, if not avoided, can result in property
damage
Information that is important for a specific topic or goal, but is not
safety-relevant
Indicates a requirement for meeting a specific goal

Desired result

A problem that might occur

1 Information on this Document

SMA Solar Technology AG

Installation Manual

ClusterController-IA-en-15

6

Содержание CLCON-10























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды