Table 6 - Recommended separation distances between portable and mobile RF communication
equipment and the
SLENDERTONE CONNECT ABS
containing Bluetooth
®
Radio Module.
The
SLENDERTONE CONNECT ABS
containing a Bluetooth
®
Radio Module is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of the
SLENDERTONE CONNECT ABS
containing a
Bluetooth
®
Radio Module can help prevent electromagnetic interference by maintaining a minimum distance between portable
and mobile RF communications equipment (transmitters) and the
SLENDERTONE CONNECT ABS
containing a Bluetooth
®
Radio
Module as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 KHz to 80 MHz
80 MHz to 800 MHz
800 MHz to 2.5 GHz
d
= 1.17
√
P
d
= 1.17
√
P
d
= 2.33
√
P
0.01
0.12
0.12
0.23
0.1
0.37
0.37
0.75
1
1.17
1.17
2.33
10
3.70
3.70
7.36
100
11.70
11.70
23.50
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m)
can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power
rating of the transmitter in watts (w) according to the transmitter manufacturer.
NOTE 1:
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
E
ng
lish
EU Only
• Wireless communication equipment such as wireless home network devices, mobile phones (other than your own),
cordless telephones, base stations and walkie-talkies of between 1W to 10W can affect this equipment and should
be kept a distance of least 2.3 to 7.3 metres away from the device.
24
25
Slendertone Connect IM Rev 4_ML Book 07/03/2016 16:37 Page 25