This symbol means that this device emits non-ionising radiation. All devices and systems that include RF
transmitters or that intentionally apply RF electromagnetic energy must have a label with this symbol.
FCC/IC transmitter declaration:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. This device complies with Industry Canada license-exempt RSSs.
Radiated output power (RF):
2.4 Ghz, 1.1mW
Rated Outputs / Voltage/Currents: Type 570
The electrical output of the
SLENDERTONE CONNECT ABS
depends on the parameter settings of the active NMES
program. The program loaded at manufacture is described as “Essential Toning” and delivers the following output:
Parameter
500
Ω
1K
Ω
Waveform type Symmetric, biphasic, constant current controlled
Peak Output Current (user adjustable)
0 - 75 mA
0 - 70mA
Peak Output Voltage
0 - 38V
0 - 70 V
Output Frequency range
60 - 70 Hz
60 - 70 Hz
Phase Duration
250 -300 µS
250 - 300 µS
DC Component
none
none
The “Essential Toning” program is broken-down into the following phases:
Description of the controller’s symbols:
There are a number of technical markings on your controller and packaging. These can be explained as follows:
The product is manufactured for Bio-Medical Research Ltd, Parkmore Business Park West, Galway, Ireland.
This symbol means Attention, read the accompanying documents.
This symbol means type BF applied parts (belt & GelPads).
The CE mark applied indicates that this equipment complies with the requirements of the ROHS Directive
(2011/65/EU) for the Restriction of Hazardous Substances in Electrical and Electronic Equipment. Hereby,
BMR Ltd., declares that this
SLENDERTONE CONNECT ABS
is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at the address
BMR Ltd., Parkmore Business Park West, Galway, Ireland.
SN
stands for serial number. On the label on the back of the controller is the serial number specific to this product. The letter
preceding the number indicates the year of manufacture, where ‘T’ denotes 2014, ‘U’ denotes 2015 etc.
At the end of the product lifecycle, do not throw this product or batteries into the normal household garbage, but
bring it to a collection point for the recycling of electronic equipment.
Some product materials can be re-used if you bring them to a recycling point. By re-using some parts or raw
materials from used products you make an important contribution to the protection of the environment. Please
contact your local authorities if you need more information about collection points in your area.
Waste Electrical and Electronic Equipment can have potentially harmful effects on the environment. Incorrect
disposal can cause harmful toxins to build up in the air, water and soil and can be harmful to human health.
Product uses Bluetooth
®
Smart.
IP22:
Ingress Protection Rating.
This symbol on the device means it is protected against access to hazardous parts with a finger and against vertically falling
water drops when tilted up to 15 degrees.
VXX:
Software version at shipping.
19
18
E
ng
lish
Phase
1
2
3
4
5
Total
(Mins)
5.0
5.0
5.0
5.0
5.0
Freq.
(Hz)
70
65
65
65
60
Pulse
(µS)
250
275
290
300
275
Ramp-Up
(Sec)
1.5
1.0
0.5
1.0
0.5
Contract
(Sec)
3.5
4.0
4.5
3.0
3.5
Ramp Down
(Sec)
1.5
1.0
0.5
1.0
1.0
Relax
(Sec)
5.5
4.0
4.5
5.0
5.0
Slendertone Connect IM Rev 4_ML Book 07/03/2016 16:37 Page 19