Sledstart SS1000YAM, Руководство по эксплуатации

Страница: 23 / 26

2 0
To manually remote start, press the "S" button on LCD remote. User will
be notified of a successful start by a three-note music tone and the ex-
haust cloud icon will appear on the LCD screen. An unsuccessful
start will result in three short beeps of the same tone and no exhaust cloud
icon appears on the LCD screen. With a successful start, the en-
gine will run for the programmed time in feature 1 of the features and op-
tions.
See chart page 17 .
During any mode of Remote Start, SledStart will cut the ignition of the
snowmobile if either the brake is applied or if the RPM's rise above pre-
set threshold, not allowing the snowmobile to be driven.
To operate the snowmobile from remote start mode, insert key in ignition,
turn one click to "RUN" position, and apply brake. Remote start mode is
now deactivated and snowmobile can be driven normally.
CAUTION: Do
not turn key to "START" position, as starter damage may occur. To Can-
cel Manual Remote Start during operation, push "S" button again.
Timer Remote Start
ALWAYS SET THE PARKING BRAKE WHEN USING ANY MODE OF
REMOTE START
To engage Timer Remote Start, press the "T" button. At this time, the
icon will appear, followed by remotely starting the snowmobile and
confirming with a three-note music tone and the exhaust cloud icon
will run. With a successful start, the engine will run for the programmed
time in feature 1 of the features and options.
See chart on page 17.
Timer Mode will function for a period of 24 hours from activation and will
operate based on the options selected on Feature 2 of the Features and
Options Menu.
See chart on page 17 . To cancel the Timer Mode, push
"T" button again and the icon will expire.
Temperature Auto-Start
ALWAYS SET THE PARKING BRAKE WHEN USING ANY MODE OF
REMOTE START
Unlike Turbo and Timer modes, Temperature Auto Start must be engaged
from the programming menu. To operate Temperature Auto Start,
see page
15 . With a successful start, the engine will run for the programmed time
in feature 1 of the features and options. See chart page 17 .