19
module relay in flashing mode to know if module is still active but ignition
has been lost.
CAUTION!!!
During the first minute after activating any mode of remote starting
(manual, temperature, timer) and the engine fails to start, or loses
ignition, SledStart will make two more attempts to start the engine.
If the snowmobile fails to start after 3 attempts SledStart shuts
down. If the engine shuts down after the one-minute window,
SledStart will not attempt to restart regardless of the number of
attempts made during initial start up. This feature is designed to
protect the engine from overheating. On many models, if the engine
has idled to a critical temperature the snowmobile’s ECM will shut
down the engine. If this happens within the one-minute window of
any remote start activation, ENGINE DAMAGE CAN OCCUR as
SledStart will attempt to restart engine during that first one minute.
Please use caution and only use remote start modes on a cold en-
gine!
O
O
O
O
O
PERATION
PERATION
PERATION
PERATION
PERATION
Key Lock
To lock the buttons on your LCD remote control, press and release
,
then press and release "T", and the
icon will appear. To un-
lock the Key Lock, repeat these steps and the
icon will disap-
pear. This is helpful in preventing unintentional starts if your LCD remote
is in your pocket.
Inquiry
At any time, pressing the X button will display real-time temperature in
either
or
depending on which mode you have selected. If you have
two LCD remotes programmed to one snowmobile and any changes are
made on one LCD, the second LCD will not update with those changes
until you press its Inquiry "X" button.
Manual Remote Start
ALWAYS SET THE PARKING BRAKE WHEN USING ANY MODE OF
REMOTE START
