background image

15

For mat, to have one Leg Extension (3) with warn-

ing decal corresponded to door of the net, the first hole 

of the frame on the left of the net door is just the hole to

attach first spring (11).

Attach the Springs (11) as follows: Hook one end of a

Spring (11) into a V-ring. 

Hook one end of a Spring

(11) into a V-ring sewn on the Jump mat. Hook a Spring 

tool (5) shown as the inset drawing in next page to the free 

end of the Spring(11). Pull it by the spring tool(5) until it 

reaches the frame. Push the end of the Spring into a hole 

in the frame. Unhook the Spring tool. 

  

After you have hooked one Spring (11) into one of the V-

rings on the Bed (Mat) (9), count exactly 18 V-rings and

18 frame holes in a clockwise direction. Attach a second

Spring to the V-ring and frame at this point. Count 18 V-

rings and 18 frame holes in a clockwise direction and

attach a third Spring. Count 18 V-rings and 18 frame

holes in a clockwise direction and attach a fourth Spring.

5. After attaching the first four Springs (11), count exact-

ly 12 V-rings and 12 frame holes in a clockwise direction.

Attach another Spring to the V-ring and frame at this

point. Count 6 V-rings and 6 frame holes in a clockwise

direction and attach another Spring. Count 6 V-rings and

6 frame holes in a clockwise direction and attach another

Spring. You will now have 6 evenly spaced Springs (11)

attaching the Bed (Mat) (9) to the trampoline frame.

Continue to attach the remaining Springs between the

previously attached Springs, until all Springs are

attached. 

Safety Note: For the Bed (Mat) (9) to have the even ten-

sion necessary for safety in jumping, the Springs (11)

must be attached as described. As you attach Springs,

carefully count the V-rings and frame holes. If a V-ring 

or hole is skipped, reattach the Springs in the proper 

position.

6. Lay the frame Pad (10) on the frame. Adjust the posi-

tion of the Frame Pad so that the slits are directly above

the Socket, as shown.

9

11

11

11

11

V-rings

11

V-ring

Frame

Inset drawing

5

5

Note:The spring has a large hook which attaches to the 

frame and a small hook which attaches to the mat ring.

Содержание SWTC1200














Отзывы: