17
Enclosure Assembly
1.
Make sure that you understand the information in the
box at the top of this page.
2.
Lay one Straight Tube (5) with foam and one Curved
Tube (6) with foam (8) on the ground, insert the Straight
Tube(5) into the curved tube(6), secure with the screw(4).
Repeat this step to attach the five remaining Straight
Tubes(5) and Curved tubes(6) together (not shown).
4
5
6
V-ring
Jump mat
7
Warning label
Opening of
the enclosure
Inspect the attachments of the enclosure
Netting to the trampoline mat (bed). Make certain each of
the V-rings on the trampoline mat (bed) is threaded
through the corresponding “buttonhole” in the Netting.
Be sure to place the door opening in the enclosure net-
ting so it is centered in between the two legs of the tra-
mpoline where the jumpers will climb off and onto
the trampoline easily as shown.
3.
