16
Do not use the trampoline without the Frame Pad (10).
The Frame Pad is designed to reduce the possibility of
injuries due to jumpers coming in contact with the tram-
poline frame. If you do not have a Frame Pad, contact
your dealer to obtain one. Properly install the Frame Pad
before using the trampoline.
7. Look under the trampoline and locate the straps
attached to the underside of the Frame Pad.
Refer to the inset drawing. Hold one of the straps. Wrap
the longer strap under the frame and then tie each end of
strap as shown. Pull tight to secure strap to frame.
Repeat this step with the remaining straps (not shown).
8. Using the included plastic tie, attach the Safety Placard
(12) to the frame near the point where jumpers will climb
onto and off the trampoline.
The trampoline is now fully assembled. Make sure that
all parts are securely attached. Familiarize yourself and
all users of the trampoline with the safety precautions,
use and instructional materials, and care and maintenance
instructions in this manual before using the trampoline.
DISASSEMBLY (TAKING APART)
To disassemble (take apart) the trampoline, follow assembly steps 1 through 8 in reverse order. Do not attempt to
disassemble any frame parts before the springs and the mat have been removed. Use gloves to protect your hands
from pinch points while taking the trampoline apart.
Straps
Frame
Inner Straps
V-ring
Cover the holes on the pad by the small covers sewn on the pad.
Socket
Socket
Position each outer strap so that one strap is tied on each
side of the frame as shown. One end of each inner strap
through the V-ring, then tied them up.
