Skytech: 5320P
REV. 8-11-20 Page 4
PROGRAM FUNCTION
This remote has two default program segments (P1) and (P2): A weekday segment and a weekend segment. To enter
program mode, push the
PROG
button or touch the
PROGRAM
(bottom) portion of the touchscreen; the word PROGRAM
will appear above the display time to indicate program operation is active.
The factory presets are:
WEEKENDS
“P1 ON” 6:00 AM at 72ºF
“P1 OFF” 10:00 AM
“P2 ON” 5:00 PM at 72ºF
“P2 OFF” 10:00 PM
WEEKDAYS
“P1 ON” 5:00 AM at 72ºF
“P1 OFF” 9:00 AM
“P2 ON” 4:00 PM at 72ºF
“P2 OFF” 10:00 PM
To turn the program function OFF, touch the
PROGRAM
portion on the touchscreen, or press the
PROG
Button at the
bottom of the transmitter. The word PROGRAM will disappear from the LCD screen.
EDITING PROGRAM SETTINGS
NOTE: P1 CAN ONLY BE SET FROM 12:00AM to 12:00PM
P2 CAN ONLY BE SET FROM 12:00PM to 12:00 AM
1. Program Segment
: (P1) Program 1 (left side of LCD screen), or
(P2)Program 2 (right side of LCD screen).
2. Weekend Segment
: Saturday and Sunday.
3. Weekday Segment
: Monday through Friday.
4. Flame ON
: Flame icon shows your appliance to turn ON.
5. Flame OFF
: Flame icon shows your appliance to turn OFF.
1
4
5
2
3
Fig. 10
Edit segments.
To edit the program settings press either the PROG button or touch the Program section of the touch screen and
hold for 5 seconds, the program section of the LCD screen will begin to flash.
•
P1 ON and “S S” (Weekend Segment) should be
flashing. Select the time you want your appliance to
turn ON by using the
UP
and
DOWN
touch buttons.
Then press
SET
(See Fig. 11).
•
P1 OFF will be flashing. Select the time you want your
appliance to turn OFF. Then press
SET
(See Fig.12).
•
The set temperature will begin to flash. Use the
UP
and
DOWN
touch buttons to select a temperature for P1,
then press
SET
(See Fig. 13).
•
Now the P2 ON will begin to flash. Select the time you
want your appliance to turn ON by using the
UP
and
DOWN
touch buttons. Then press
SET
. (See Fig. 14).
•
P2 OFF will be flashing. Select a time you want your
appliance to turn OFF. Then press
SET
(See Fig. 15).
•
The set temperature will begin to flash. Use the
UP
and
DOWN
touch buttons to select a temperature for P2,
then press
SET
(See Fig. 11).
•
“MTWTF” (Weekday Segment) will replace “S S”. P1
ON will be flashing. Repeat the above steps to set the
ON and OFF times and set temperatures for weekdays.
(See Fig. 16)
Fig. 11
Program ON at 6:00AM.
Fig. 12
Program OFF at 10:00AM.
Fig. 13
Temperature set 72°F.
Fig. 14
Program ON at 5:00PM.
Fig. 15
Program OFF at 10:00PM.
Fig.16
Weekday segments (Mon-Fri).
