·
31
32 ·
STORAGE DATA PROGRAM
Storage data program
Voltage
Data
number
Capacity Type of
battery
Start
Enter
Setting of the parameter in the screen will not affect the charge and
discharge process. They just present the specification of the battery. The
example is NiMH battery pack, including 12 cells, which the capacity is
3000m Ah.
DEC INC
DEC
DEC
DEC
-
-
-
INC
INC
INC
+
+
+
Start
Enter
Batt type
stop
Set up the discharge current and final voltage.
Set up the charge current in the manual mode, or current limit in the auto
mode. Press INC and DEC key simultaneously to make the current field blink
to switch the charge mode.
DEC INC
>
3
seconds
For your convenience, Ultimate 400W has a data storage and load program. It can store ten batteries data
representing the respective specifications of batteries. You can call back the data when charging or
discharging without setting up the program again. Press START/ENTER key to make it blink, and use INC
or DEC to set up the parameter.
LOAD DATA PROGRAM
DEC INC
DEC
DEC
-
-
INC
INC
+
+
Start
Enter
Saving the data
Set up the charge/ discharge sequence and cycle number.
>
3
seconds
Load data program
Start
Enter
Start
Enter
Choose the data number you want to call back. The data you want to call back
will be displayed.
Loading the data.
This program is to load the date stored at the save data program. Press START/ENTER key to make the
data field blink and press INC or DEC for more than 3 seconds to load the data.
>
3
seconds
Ultimate 400W
Ultimate 400W
