Operating Program
Here is the detailed procedure to make the charger work. All the screens and operations
will take Li-Po BALANCE CHARGE program for example,
Note: We will explain the operating procedure of one channel as
the procedure for channel A and B is identical..
1.
Connection
Connecting to power source
There are two kinds of inputs for SKYRC D100v
2
, DC 11-18V and AC 100-240V.
A. Operating in AC mode
SKYRC D100v
2
comes with built-in switching power supply. You can connect the
AC power cord directly to the main AC socket. (100-240V AC).
Note: The output power in AC mode is 100W totally for Channel A, Channel B and
Power supply.
In AC mode, it supports Power Distribution. The total power for Channel A, Channel
B and power supply is 100W. You could set the Max Power for one output port
(Take Channel A for example)as following,
Then, the channel B and DC power supply will take the rest power automatically (For
example, if you set DC power supply as 20W and Channel A as 50W, the Channel B will
take the rest power of 30W.
If Channel A/Channel B and DC power supply are both working, you can't
change the power for them.
If DC power supply is working, you can change the power of Channel A and
Channel B. thus, the DC power supply will take the rest power automatically.
B. Operating in DC mode
Please connect SKYRC D100
v
2
with AC/DC power supply by supplied DC input cable.
Also you could use terminal clips with DC connectors, for attaching directly to 12V car
batteries. It is critically important that you use either a fully charged 13.8V car battery or a
high-quality AC/DC power supply in the range of 11-18V DC output with minimum power
300W or higher to insure reliable performance.
1).
NOTE1:
NOTE2:
13 ·
A
B
DC SUPPLY: 20W
CHA:50W CHB:30W
DC SUPPLY: 20W
CHA:50W CHB:30W
D100v
2
