·
34
Charge
Discharge
15:53
Revo
5000
mAh
120
Min
50
122
C
F
10
Min
11.0
V
15:53
Revo
Enter into System Setting
CH. A
CH. B
CH. A
CH. B
Change Password >
4). System Setting
CH. A
CH. B
SCAN TO GO
NEXT
DISCHARGER
BAL.CHARGE
3
4
CHARGER
2
LiIon
LiFe
LiPo
PROGRAM
SYSTEM
HOME
15:53
Revo
Operation
Mode
Battery
Type
Battery
Cells
6
5
Balance Port Enable
PROGRAM
SYSTEM
HOME
PROGRAM
SYSTEM
HOME
Rest Time Between Cycle
Safety Timer
Capacity Cut-Off
Temperature Cut-Off
DC Input Low Cut-Off
Key Beep
Buzzer
5). SCAN TO GO
A very unique feature of D100v
2
is SCAN TO GO (automatically charging system). As
the range of battery types and capacity becomes more and more, each battery
requires its own dedicated charging process. It is easy to set up the charger
incorrectly for a specific type of battery, resulting damage the battery or even cause
accident.
The revolutionary SCAN TO GO provides a solution to this problem by allowing the
user to assign a QR Code which contains all the relevant data for the battery for
charging or discharging. The user can create a unique QR Code by using
“SkyCharger” apps. Print it and paste it on the battery.
Using your smart phone and launch “SkyCharger” App. Since all the essential
information is stored in the QR Code. All you need to do is press the Scan button, and
the charge or discharge process will start automatically.
D100v
2
Controlling the Charger Using the App
