Skymsen CR-4L, Инструкция по эксплуатации, Страница: 7 / 12

04
2.1 Basic Operation Practices
2.1.1 Dangerous parts
Some areas of the electric device have parts that are connected or have
parts connected to high voltage. These parts when touched may cause severe electrical
shocks or even be fatal.
Never touch manual commands such as switches, buttons, keys and
knobs with your hands wearing wet clothes and/or wet shoes. By not following these
instructions operator could be exposed to severe electrical shocks or even to a fatal
situation.
2.1.2 Warnings
The operator has to be well familiar with the position of ON/OFF Switch to
make sure the Switch is easy to be used when necessary. Before any kind of
maintenance, physically remove the plug from its socket .
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make
sure the floor is clean and dry.
Before to give any manual command (switch, buttons, turn keys or lever)
be sure the command is the correct one . Check this manual for further details if
necessary.
Never use a manual command ( switch , buttons , lever ) unadvisedly.
If any work is to be made by two or more persons, coordination signs will
have to be given for each operation step . Every step of the operation shall be taken only if
a sign has been made and responded.
2.1.3 Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases .
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical
components of the machine.
DO NOT MODIFY original characteristics of the machine.
DO NOT REMOVE, TEAR OFF OR MACULATE any safety or
identification labels . If any labels has been removed or is no longer legible contact your
nearest dealer for replacement.