Skymsen CA-300L-HD, Инструкция по эксплуатации

Страница: 7 / 18

30
TABLE 02
PROBLEMS CAUSES SOLUTIONS
- Equipment does not turn on.
- Energy supply interrupted.
-Emer gency buon pressed.
- Problem in the equipment’s
internal or external electric
circuit.
- Verify the supply of electric
energy.
- Proceed as per item 3.
- Call qualified technical
service.
- Burn and/or smoke smell.
- Problem on internal or
external electrical circuit of the
equipment;
- Call qualified technical
service.
- The equipment turns on, but
when product is processed
in the equipment, it stops or
turns in low r
otaon.
- Problem on internal or
external electrical circuit of the
equipment;
- Call qualified technical
service.
- Damaged electrical cord.
- Damage during
product transport
aon
and/or handling
- Call qualified technical
service.
- Irregular Slicing
- Blade los t its cung edge.
- Proceed as per item 3.2.1
- When the equipment is
turned on only the Blade spins - The Sharpening command is
acvated..
- Proceed as per item 3.1
7
1.2 Main Components
All the components used in this equipment are made of and constructed with thoroughly
selected materials for each funcon, in accordance with test standards and Siemsen’s
experience.
PICTURE 01
01 - Feeding Cord
02 - Equip. Terminal
03 - General key
04 - Side Regulator
05 - Pusher
06 - Movable Table 07 - Regulang Handle
08 - Control Panel
09 - On/Off Key
10 - Emer
gency Buon
11 - Foot
12 - Cut Regula
ng Table
04
01 03 02
06
05
12
08 09 10 07 11