Skymaster NVR BOX User Manual
Page 26 of 32
Detection type
:
select detection type --motion, video loss ,“keep out" alarm
Alarm duration:
after chose the trigger video detection, the time alarm last
Area edit :
set motion detection area ;move by choosing left of mouse.
Record channel : system defaulted channel after trigger video detection,,
Alarm
:
“
☑
”means start
,
“□”means non start
。
Buzzer
:
“
☑
”means start
,
“□”means non start
。
OSD
:
“
☑
”means '"detection " marks shows on screen,
,
“□” means non show
E-Mail notice
:
“
☑
” means E-Mail valid
,
“□” means E-Mail invalid
。
Copy to
:
select the target channel on the right of "copy to "button ,click "copy to" & ''OK " then system
will set the current channel setup information to other target video channel. Click button
"cancel", the setup information is non-saved but to exit.
3.14.4 Bitrate
Right click mouse, Choose the "General setup"--
→“
Channel Setup
”
--
→“
Bitrate
”
Pic 3.14.4
3.14.5 Channel Detail
Right click mouse, Choose the "General setup"--
→“
Channel Setup
”
--
→“
Channel Detail
”