Skymaster NVR BOX User Manual
Page 19 of 32
3.12.2 Sensor Setup
Pic 3.12.2
Right click mouse, Choose the "General setup"--
→“
Record Setup
”
--
→“
Sensor Setup
”
Channel: choose the right channel, click the select box to choose
Work mode: setting to start alarm or not
Alarm duration: set up alarm duration time
Recording channel: When alarm is triggered, channel needed to be recorded
Alarm: “
☑
” enable alarm, “□” close alarm
Buzzer: “
☑
”start buzzer, “□” close buzzer
Screen notice: “
☑
”alarm icon shows on the screen, “□” no alarm icon shows on the screen
Copy to: choose the target channel in the right select box, click" copy to" ,the setting information will be applied to
other channel.
After the setting, click "OK" to exit with saving the , or click "cancel" to exit without saving.