Skymaster NVR BOX User Manual
Page 12 of 32
3.6 Video Playback
Right click mouse in main menu----Video playback----choose channel No.----choose Record mode----In search time,
input beginning time and end time----click search, recording will come out, drag time bar----click playback to start
Pic 3.6
Channel
：
to choose the target channel by clicking the check box.
Record mode
：
to choose the recode mode by clicking the check box
Search time
：
input the Starting and finishing time into edit box
Search
：
After setup the above search condition, click "search" to begin the corresponding video file searching and
show the files. Red means time recording, green means MD recording, yellow means sensor recording.
Playback
：
chose playback and turn into playback interface. In the search list box, choose the time bucket
according up, down, left, right key or move the mouse. Click
【
】
or left mouse to enter "video
playback "Interface
Cancel
：
back to previous menu.
3.7
Video back up
Video back up need a USB disk to plug in the USB slot of the NVR,
Right click mouse in main menu--->Video backup--->choose channel No. --->choose Record mode--->In search time,
input beginning time and end time--->click search, recording will come out--->choose the video which need to
backup--->click video backup
