SKYLOTEC G-1131-XS/M, Инструкция по эксплуатации

Страница: 147 / 224

11
equipment) prior to each use. Repairs must only be carried out by
the manufacturer. Essential yearly inspections and additional
checks following loading must be carried out by the manufacturer
or a trained approved person. The safety of the user is dependent
on the effectiveness and durability of the equipmentLet any
equipment that becomes wet, dry naturally, and do not directly
expose it to the effects of heat.
6.1) Hand wash up. 40° C (104 degrees F).
6.2) Dry and store at room temperature.
6.3) Store dry and protected from light.
6.4) Do not tumble dry or wash, do not bleach.
6.5) Do not contact with harsh substances.
6.6) Mark only on labels or with permanent marker (Edding 3000)
and make a note in the log book.
Please contact the manufacturer if you have any doubt. If any faults
are picked up during inspection, the product must be replaced.