Skyjack SJ9233 RT Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 122

background image

63

SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT

221491AFA

Drive forward or rearward

Section 5 – Operation

5.5 Drive forward or rearward

WARNING

Make sure there are no personnel or obstructions
in the path of travel. Acquaint yourself with the
blind spots of the MEWP. If you do not obey, there
is a risk of death or severe injury.

1.

Energize the platform control console (refer to

Section 5.3

).

2.

Move the

lift/off/drive

switch to the drive

position.

3.

Squeeze and hold the

function-enable

switch.

4.

Move the

controller handle

forward or rearward

to drive at and in the necessary speed and
direction.

5.

Move the

controller handle

to the

neutral

central position to stop. Release the

function-

enable

switch.

WARNING

Push the emergency-stop button when you are at
the necessary location or elevation. This prevents
unintended MEWP movem

ent. If you do not obey,

there is a risk of death or

serious

injury.

5.6 Steer

1.

Energize the platform control console (refer to

Section 5.3

).

2.

Move the

lift/off/drive

switch to the drive

position.

3.

Squeeze and hold the

function-enable

switch.

4.

Push the

steering rocker

switch on top of the

controller handle

in one of the two directions to

steer.

NOTE

The steer function is not proportional. Drive and steer
functions can be active at the same time.

5.7 Select the level-drive or

inclined-drive mode

▪

Select the level-drive mode when you drive on a
level surface.

1.

To use the level drive mode, move the

inclined-drive/level-drive

switch to the level-

drive (high speed/low torque) position.

WARNING

Do not drive the MEWP in the elevated position on
a slope. Fully retract the MEWP before you operate
it on a slope. If you do not obey, there is a risk of
death or severe injury.

▪

Select the inclined-drive mode in these
situations:

▪

When you drive up or down slopes

▪

When you drive on rough ground

▪

When you drive the MEWP on to or remove it
from a transport vehicle.

1.

To use the inclined-drive, move the

inclined-

drive/level-drive

switch to the inclined-drive

(low speed/high torque) position.

WARNING

Push the emergency-stop button when you are at
the necessary location or elevation. This prevents
unintended MEWP movem

ent. If you do not obey,

there is a risk of death or

serious

injury.

«
...
61
62
63
64
65
...
»

Содержание SJ9233 RT



























































































































Отзывы:

Нет отзывов

Похожие инструкции для SJ9233 RT

Sinoboom GTJZ1412

Бренд: Elevated Access Страницы: 49

Бренд: Terex Страницы: 15

Бренд: Terex Страницы: 7

Бренд: Workplace Products Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды