Skyjack SJ9233 RT Скачать руководство пользователя страница 29

Страница: 29 / 122

SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT

221491AFA

Features and devices

Section 3 – Familiarization

M
IL

IO
N

3.4-8 Platform load-sensing system

The platform load-sensing system prevents normal
MEWP movement when the platform is overloaded
and in a stationary position. Refer to

Section 7.5

for

platform capacities.

Load status

Result

The platform is
near the rated load.
All functions are
available.

The light on the
emergency-stop button
flashes on the platform and
base control consoles.

The platform is
at the rated load.
All functions are
available.

The alarm sounds. The
light on the emergency-
stop button flashes on the
platform and base control
consoles.

The load on the
platform is more
than the rated load.
All normal MEWP
movement functions
are unavailable.

The light on the emergency-
stop button continues to
flash on the platform and
base control consoles.

The alarm continues to
sound at an increased
frequency.

Remove the overload from the platform to continue
the normal operation.

WARNING

Fall hazard.

Do not try to free a

snagged

platform

with the base controls until you remove all
personnel from the platform. If you do not obey,
there is a risk of death or

serious

injury.

3.4-9 Maintenance support(s)

Use the

maintenance support(s)

when you

do an

inspection of

the

lift

mechanism or do maintenance.

Refer to

Section 6.6

for the procedure on how to use

the maintenance support(s).

NOTE

Models

SJ9233 RT, SJ9243 RT, and SJ9664 RT only

have one maintenance support, found at the bottom.
Model SJ9253 RT has two maintenance supports.

Содержание SJ9233 RT



























































































































Результаты поиска

Содержание SJ9233 RT

Отзывы:

Похожие инструкции для SJ9233 RT

Бренды по названию

Популярные бренды

Skyjack SJ9233 RT, Руководство по эксплуатации

Результаты поиска

Содержание SJ9233 RT

Отзывы:

Похожие инструкции для SJ9233 RT

Бренды по названию

Популярные бренды