Skyjack SJ7127 RT, Руководство по эксплуатации

Страница: 59 / 94

Rough Terrain Scissors
December 2007 Page 59
Section 3 - Operation Loading/Unloading
Forklift pocket
(Model 9250)
Forklift pocket
(Models 71xx)
Figure 3-12. Forklift Pockets
NOTE
The mass of the aerial platform is as
per
Table 4.3 . The center of gravity is
approximately located in the middle of the
aerial platform, front to back and side to
side, as illustrated in
Figure 3-11 . Vertically,
the center of gravity is approximately just
above the base chassis.
NOTE
The aerial platform can be lifted with a
forklift from the sides, but Skyjack does not
recommend this use, except for Models 92xx
that are equipped with designated lifting
pockets. See Figure 3-12 .
3.10-2 Driving
Before driving the aerial platform:
• Ramp or dock capacity must be sufficient to
withstand maximum aerial platform weight.
• Ramp should be equipped with side guards to
prevent inadvertent fall from the ramp.
• Incline must not exceed aerial platform gradeability
(refer to
Table 4.3 ).
• Aerial platform brake must be checked for proper
operation.
• Aerial platform speed must be on high torque
setting.
WARNING
When transporting, the aerial platform
must be secured to the truck or trailer
deck. Tie downs are available as illustrated
in Figure 3-10 .