Skyjack SJ7127 RT Скачать руководство пользователя страница 48

Страница: 48 / 94

Page 48

December 2007

Rough Terrain Scissors

Operator’s Responsibility

Section 3 - Operation

3.7 Operator’s Responsibility

It is the responsibility of the operator, prior to each work
shift, to perform the following:

1. Visual and Daily Maintenance Inspections

•

are designed to discover any damage of
components before the aerial platform is put
into service.

•

are done before the operator performs the
function tests.

WARNING

Failure to locate and repair damage, and
discover loose or missing parts may

result in an unsafe operating condition.

2. Function Tests

•

are designed to discover any malfunctions
before the aerial platform is put into service.

IMPORTANT

The operator must understand and follow
the step-by-step instructions to test all

aerial platform functions.

The operator should make a copy of the Operator’s
Checklist (see

Table 4.9

) and fill out the visual and daily

maintenance inspections and the function tests sections
while performing the items outlined in

Section 2.3

and

Section 2.4

IMPORTANT

If damaged or any unauthorized variation
from factory-delivered condition is
discovered, the aerial platform must be

tagged and removed from service.

Repairs to the aerial platform may only be made by a
qualified service technician. After repairs are completed,
the operator must perform visual and daily maintenance
inspections & function tests again.

Scheduled maintenance inspections shall only
be performed by qualified service technician (see

Table 4.8

Содержание SJ7127 RT































































































Результаты поиска

Содержание SJ7127 RT

Отзывы:

Похожие инструкции для SJ7127 RT

Бренды по названию

Популярные бренды

Skyjack SJ7127 RT, Руководство по эксплуатации

Результаты поиска

Содержание SJ7127 RT

Отзывы:

Похожие инструкции для SJ7127 RT

Бренды по названию

Популярные бренды