manualshive.com logo in svg

Skyjack SJ7127 RT, Руководство по эксплуатации


Поделиться
Скачать
background image

Rough Terrain Scissors

December 2007

Page 5

Section 1 - About Your Aerial Platform 

Read and Heed

SKYJACK

 is continuously improving and expanding product features on its equipment, therefore, specifications 

and dimensions are subject to change without notice.

Aerial Platform and Mobile Elevating Work Platform Definition

A mobile device that has a positionable platform supported from ground level by a structure.

Purpose of Equipment

The SKYJACK Rough Terrain’s mid and full size aerial platforms are designed to transport and raise personnel, 
tools and materials to overhead work areas.

Use of Equipment

The aerial platform is a highly maneuverable, mobile work station. Work platform elevation and elevated driving 
must only be done on a firm level surface. It can be driven over uneven terrain only when the platform is fully 
lowered.

Manual

The operating manual is considered a fundamental part of the aerial platform. It is a very important way to 
communicate necessary safety information to users and operators. A complete and legible copy of this manual 
must be kept in the provided weather-resistant storage compartment on the aerial platform at all times.

Operator 

The operator must read and completely understand both this operating manual and the safety panel label located 
on the platform and all other warnings in this manual and on the aerial platform. Compare the labels on the 
aerial platform with the labels found within this manual. If any labels are damaged or missing, replace them 
immediately.

Service Policy and Warranty

SKYJACK warrants each new SJRT Series aerial platform to be free of defective parts and workmanship for the first 
24 months. Any defective part will be replaced or repaired by your local SKYJACK dealer at no charge for parts or 
labor. Contact the SKYJACK Service Department for warranty statement extensions or exclusions.

Optional Accessories

The SKYJACK aerial platform is designed to accept a variety of optional accessories. These are listed under 
“Standard and Optional Features” in

 Table 4.1

. Operating instructions for these options (if equipped) are located 

in 

Section 3

 of this manual.

For non-standard components or systems, contact the SKYJACK Service Department at

(

 : 800 275-9522

7

  : 630 262-0006

Include the model and serial number for each applicable aerial platform.

Scope of this Manual

a. 

This manual applies to the ANSI/SIA, CSA version of the Mid Size and Full Size Rough Terrain aerial platform 
models listed  on 

Table 4.1

.

 - 

Equipment identified 

with “ANSI” meets the ANSI SIA-A92.6-2006 standard.

 - 

Equipment identified

 with “CSA” meets the CSA B354.2-01 standard.

b. 

CSA (Canada)

Operators are required to conform to national, territorial/provincial and local health and safety regulations 
applicable to the operation of this aerial platform.

c. 

ANSI/SIA (United States)

Operators are required by the current ANSI/SIA A92.6 standards to read and understand their responsibilities 
in the manual of responsibilities before they use or operate this aerial platform.

1

1

1

1

Section 1 - About Your Aerial Platform

Read and Heed

Содержание SJ7127 RT































































































Отзывы:

Нет отзывов

Похожие инструкции для SJ7127 RT

BendPak 5175151 Service Manual preview
5175151
Бренд: BendPak Страницы: 25
BendPak 5175025 Service Manual preview
5175025
Бренд: BendPak Страницы: 31
BendPak 5175993 Service Manual preview
5175993
Бренд: BendPak Страницы: 35
Terex Genie Z-33/18 Service And Repair Manual preview
Genie Z-33/18
Бренд: Terex Страницы: 117
Terex Genie ZX-135/70 Operator'S Manual preview
Genie ZX-135/70
Бренд: Terex Страницы: 66

Бренды по названию

Популярные бренды

Загрузить еще бренды