Skyjack SJ7127 RT Скачать руководство пользователя страница 36

Страница: 36 / 94

Page 36

December 2007

Rough Terrain Scissors

Function Tests

Section 2 - Familiarization

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

Attempt to partially extend Right-Rear
Outrigger (approximately 4”).

Result:

Outrigger will not extend.

Attempt to partially extend Left-Rear
Outrigger (approximately 4”).

Result:

Outrigger will not extend.

11. Lower the platform to stowed position.

Result:

Lower function will operate.

12. Raise the platform 1 foot from stowed

position and partially extend Left-Front
Outrigger (approximately 4”).

Attempt to lift the platform.

Result:

Lift function will not operate.

Attempt to drive the aerial platform.

Result:

Drive function will not

operate.

Attempt to lower the platform.

Result:

Lower function will operate.

13. Platform at stowed position.

With Left-Front Outrigger partially
extended, attempt to lift the platform.

Result:

Lift function will not operate.

With Right-Front Outrigger partially
extended, attempt to lift the platform.

Result:

Lift function will not operate.

With Right-Rear Outrigger partially
extended, attempt to lift the platform.

Result:

Lift function will not operate.

With Left-Rear Outrigger partially
extended, attempt to lift the platform.

Result:

Lift function will not operate.

14. Platform at stowed position.

Extend each outrigger until it raises the
tires up approximately 2”.

Retract the Left-Front Outrigger until the
weight is resting on the corresponding
tire.

Extend the Right-Rear Outrigger until it
makes contact with ground.

Attempt to lift the platform 1 foot.

Result:

Lift function will not operate.

15. Platform at stowed position.

Extend each outrigger until it raises the
tires up approximately 2”.

Retract the Right-Front Outrigger
until the weight is resting on the
corresponding tire.

Extend the Left-Rear Outrigger until it
makes contact with ground.

Left-Rear

Right-Rear

Right-Front

Left-Front

Platform Control

Console

FAMILIARIZA

TION

FAMILIARIZA

TION

Содержание SJ7127 RT































































































Результаты поиска

Содержание SJ7127 RT

Отзывы:

Skyjack SJ7127 RT, Руководство по эксплуатации, Страница: 36 / 94

Результаты поиска

Содержание SJ7127 RT

Отзывы: