Skyjack SJ7127 RT, Руководство по эксплуатации

Страница: 50 / 94

Page 50 December 2007
Rough Terrain Scissors
Start Operation Section 3 - Operation
11. To start the engine:
• If dual fuel engine is cold, select and hold
“
” choke switch (if equipped) with engine
“ ” start switch to start the engine.
• If diesel engine is cold, select and hold
“
” glow plug switch for 15 to 20 seconds or
until indicator light goes off. Depress and hold
“
” engine start switch to start the engine.
• If engine is warm, depress and hold “ ”
engine start switch to start the engine.
3.8-2 To Raise or Lower Platform Using Base
Control Console
WARNING
Be aware of overhead obstructions or
other possible hazards around the aerial
platform when lifting.
WARNING
Do not lower the platform unless the
area below is clear of personnel and
obstructions.
1. Activate base control console (refer to
Section 3.8-1 ).
2. On base control console, select and hold
“ ” enable switch.
3. Select and hold lower/neutral/raise switch to
either “ ” raise or “ ” lower position. Release
switch to stop.
3.8-3 To Activate Platform Control Console
1. Turn main power disconnect switch to “ ” on
position.
2. On engine control console, select off/on/start
switch to “ ” on position.
3. For dual fuel engine, select fuel supply by moving
fuel switch to either “ ” gasoline or “ ”
liquid propane gas position.
4. On base control console, pull out “ ” emergency
stop button.
WARNING
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
5. Use the ladder of aerial platform to access
platform.
6. Close the gate.
7. On platform control console, insert key into off/lift/
drive key switch and select “ ” lift position.
8. Pull out “ ” emergency stop button. A beeping
sound should be audible and light should come
on.
WARNING
If beeping sound is not audible and light
does not come on, aerial platform must
be tagged and placed out of service.
9. Select low/high throttle switch to “ ” low throttle
position.
CAUTION
Do not start the engine in the high throttle
position.
10. To start the engine:
• If dual fuel engine is cold, depress and hold
“
” choke pushbutton (if equipped) with
engine “ ” start pushbutton to start the
engine.
• If diesel engine is cold, select and hold
“
” glow plug pushbutton for 15 to
20 seconds or until indicator light goes
off. Depress and hold “
” engine start
pushbutton to start the engine.
• If engine is warm, depress and hold “ ”
engine start pushbutton to start the engine.