Skyjack SJ63AJ, Руководство по эксплуатации, Страница: 85 / 98

SJ 63AJ
December 2007 Page 85
No. Label Pictorial Description
12c
TM
Base Control Console
Push breaker back in to reset. Select and hold
“ ” to enable error blink code for engine control unit (ECU).
Read operating manual.
Select “ ” to enable base control console, “ ” to turn engine off
or “ ” to enable platform control console.
Push
“ ” emergency stop to stop engine and disable controls.
Select
“ ” to extend fly boom or “ to retract fly boom.
Select
“ ” to rotate platform to the left or “ ”
to rotate to the right.
Select
“ ” to tilt platform up or “ ” to tilt platform down.
Select “ ” to move jib up or “ ” to move jib down.
Select
“ ”
to rotate turret to the left or
“ ”
to rotate to the right.
Select “ ” to raise riser or “ ” to lower riser.
Select “ ” to raise main boom or “ ” to lower main boom.
Push and hold “ ” to start engine.
Push and hold “ ” to enable base control functions.
With engine off, push and hold “ ” to enable the emergency
power unit for “ ” emergency descent.
Do not operate emergency power unit if platform capacity is
exceeded “ .”
Activate the standstill regeneration by moving the standstill switch
on the base controls to the on position.
102962AC ZZ
D
3
11
9
7 4 5 6 5 4 6 8
2
10
3
1
12
Control Compartment (Continued)
Deutz TCD2.2
Section 5 Labels