Skyjack SJ63AJ, Руководство по эксплуатации, Страница: 61 / 98

SJ 63AJ
December 2007 Page 61
Section 3 - Operation Loading/Unloading
3.11-2 Locking the Turret
1. Ensure that turret is positioned so that turret
transportation lock tube (
item 1 - Figure 3-4 ) is
aligned into one of two turret locking points in the
turret rotation lock plate.
2. Pull out turret lock retaining pin ( item 2 - Figure 3-4 ).
Lower turret lock into locked position and reinsert
turret lock retaining pin.
3.11-3 Lifting
NOTE
When it becomes necessary to lift MEWP,
it is very important that lifting devices are
attached only to designated lifting points
(refer to Figure 3-5 ).
WARNING
Use chains of ample load capacity
sufficient to withstand MEWP weight.
1. Place boom in stowed position centered
between drive wheels. Lock turret using turret
transportation locking pin (refer to Section 3.11-2 )
into the transport point (refer to Figure 3-4 ).
2. Turn main power disconnect switch to “ ” off
position.
3. Remove all loose items from MEWP.
4. Properly adjust rigging to prevent damage to
MEWP and so MEWP remains level.
Figure 3-4. Turret Transportation Lock & Locking Points
Figure 3-5. Lifting Points
NOTE: Center of gravity varies with different options.
1 2
Transport Point