Skyjack SJ63AJ Скачать руководство пользователя страница 21

Страница: 21 / 98

SJ 63AJ

December 2007

Page 21

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

AMILIARIZA

TION

2.3 Visual & Daily Maintenance Inspections

Begin the visual and daily maintenance inspections
by checking each item in sequence for the conditions

listed in this section.

WARNING

To avoid injury, do not operate an MEWP
until all malfunctions have been corrected.

WARNING

To avoid possible injury, ensure MEWP
power is off during your visual and daily

maintenance inspections.

CAUTION

Ensure MEWP is on a firm, level

surface.

NOTE

While doing visual and daily inspections
in different areas, be aware to also inspect

limit switches, electrical and hydraulic

components.

2.3-1 Labels

Refer to

Section 5 - Labels

in this manual and determine

that all labels are in place and are legible.

2.3-2 Electrical

Maintaining the electrical components is essential to
good performance and service life of the MEWP.

Inspect the following areas for chafed, corroded

and loose wires:
•

boom to platform cable harness

•

engine compartment electrical panel

• engine wiring harness
• rotary manifold wiring

2.3-3 Limit Switches

Ensure limit switches are properly secured with no signs

of visible damage and movement is not obstructed.

2.3-4 Hydraulic

Maintaining the hydraulic components is essential to
good performance and service life of the MEWP.

Perform a visual inspection around the following

areas:
•

hydraulic tank filter, fittings, hoses, emergency
power unit and turret/base surface

•

engine compartment fittings, hoses, main
pump, filter and turret/base surface

•  all hydraulic cylinders
•  all hydraulic manifolds
•  underside of the turret
•  underside of the base
•  ground area under the MEWP

Platform

Railing

Footswitch

Platform Control
Console

Manual Box

Platform
Assembly

Section 2 - Familiarization

Visual & Maintenance Inspection

Содержание SJ63AJ



































































































Результаты поиска

Содержание SJ63AJ

Отзывы:

Skyjack SJ63AJ, Руководство по эксплуатации, Страница: 21 / 98

Результаты поиска

Содержание SJ63AJ

Отзывы: