Skyjack SJ63AJ, Руководство по эксплуатации, Страница: 32 / 98

Page 32 December 2007
SJ 63AJ
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
F
AMILIARIZA
TION
NOTE
To conserve battery power, test each
function through a partial cycle.
3. On base control console, pull out “ ”
emergency stop button.
4. O n b a s e c o n t r o l c o n s o l e , t u r n
off/base/platform (base/off/platform) key
switch to “ ” platform position.
5. Select “ ” emergency power
position from start/function enable/
emergency power switch and activate
each boom function.
Result: All selected functions should
operate.
6. Turn off/base/platform (base/off/platform)
key switch to “ ” base position.
7. Select “ ” emergency power
position from start/function enable/
emergency power switch and activate
each boom function.
Result: All selected functions should
operate.
• Test Off/Base/Platform (Base/Off/Platform)
Switch
1. Ensure both “ ” emergency stop
buttons are pulled out.
Result: Glow plug light should turn on and
turn off after a slight delay.
2. Start engine.
3. On base control console, turn off/base/
platform (base/off/platform) key switch to
“
” off position.
Result: Engine should shut down and
MEWP functions should not operate.
4. On base control console, turn off/base/
platform (base/off/platform) key switch to
“ ” platform position.
WARNING
Ensure that you maintain three points
of contact to mount/dismount platform.
5. Enter platform and close gate.
6. On platform control console, select
“ ” on position from engine start/on/off
switch.
Base Control Console
HOUR METER
QUARTZ
COUNTER
Off/Base/Platform
Key Switch
Emergency
Stop
HOUR METER
QUARTZ
COUNTER
Base/Off/Platform
Key Switch
Emergency
Stop
Start/Function
Enable/
Emergency
Power Switch
Function Tests Section 2 - Familiarization