Skyjack SJ63AJ, Руководство по эксплуатации, Страница: 62 / 98

Page 62 December 2007
SJ 63AJ
Chassis Tilt Section 3 - Operation
3.12 Chassis Tilt
This section guides the operator with regard to
recovering from an inclined position.
IMPORTANT
When the boom is raised or extended,
the MEWP must only be operated on firm
level surfaces.
WARNING
If the MEWP becomes tilted causing the
alarm to sound, the platform must be fully
lowered and retracted immediately. Drive
functions are not available when the tilt
alarm is active.
3.12-1 Platform Uphill
If the MEWP becomes tilted with the platform uphill
(refer to
Figure 3-6 ) follow the steps below to return to
a lowered and retracted position.
1. Lower main boom completely.
2. Lower riser completely.
3. Retract fly boom completely.
4. Drive to a firm level surface.
3.12-2 Platform Downhill
If the MEWP becomes tilted with the platform downhill
(refer to
Figure 3-7 ) follow the steps below to return to
a lowered and retracted position.
1. Retract fly boom completely.
2. Lower riser completely.
3. Lower main boom completely.
4. Drive to a firm level surface.
Figure 3-7. Platform Downhill Figure 3-6. Platform Uphill