Skyjack SJ 3215, Руководство по эксплуатации

Страница: 68 / 114

216380ACA SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740
68
Section 6 – Procedures Fold the guardrails
6.8-2 Store the maintenance support(s)
1. Turn the main power disconnect switch to the
on position.
WARNING
Look for overhead obstructions or other possible
hazards around the MEWP when you raise the
platform. Do not lower the platform unless the area
below is clear of personnel and obstructions. If
you do not obey, there is a risk of death or serious
injury.
2. Raise the platform until there is adequate
clearance to retract the
maintenance
support(s) .
3. For SJ3215, SJ3219, SJ3220, SJ3226, SJ4726,
SJ4732
Retract the
lower maintenance support into the
storage bracket.
4. For SJ4740 only:
a. Retract the top maintenance support into the
storage bracket.
b. Retract the lower maintenance support into
the storage bracket.
5. Fully lower the platform.
6.9 Fold the guardrails
When folded down, the guardrail system decreases
the total height of the retracted MEWP for transport.
WARNING
Fall hazard. To prevent a fall, keep away from the
sides of the platform when you fold or unfold the
guardrails. If you do not obey, there is a risk of
death or serious injury.
Rear
Gate Extension
Guardrail
Right
Guardrail
1
Extension
Handrails
Left
Guardrail
1
Guardrail lock-pin with lanyard : Use this pin to
lock the guardrails.
WARNING
Fall hazard. Fully lower the platform before you
fold or unfold the guardrails. If you do not obey,
there is a risk of death or serious injury.
WARNING
Before you operate this MEWP, make sure that
the guardrail system does not have loose or
missing lock-pins. The guardrail system must be
in the vertical position. Lock all pins correctly. An
incorrectly locked guardrail can cause a fall, which
can result in death or serious injury.