Skyjack SJ 3215, Руководство по эксплуатации

Страница: 31 / 114

SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740 216380ACA
31
Optional equipment Section 3 – Familiarization
With the access control function, the user can control
access to the MEWP operation. You can get unique
PIN codes or Smart ID cards to unlock and start the
MEWP. For this function, an Elevate™ telematics device
and an access control keypad are necessary. With the
Trackunit Manager, the MEWP owner can customize the
access control to the MEWP
(https://www.trackunit.com/services/manager/). Speak
to the MEWP owner to help you with PIN codes or
Smart ID cards that do not function, or you cannot find.
2
1
NOT USED
Figure 06 Keypad of the access control unit
1
Orange indicator: This light shows that the
access control unit is ON. The keypad always
has power regardless of the emergency-stop,
off/platform/base key switch, or main power
disconnect position.
2
Green/red indicator: A green light shows that the
access control unit is in operation. A red light that
flashes shows that the keypad received a cancel
input.
Operation
To operate the MEWP, the light and all of these power
connections must be ON before the set time expires.
This set time is the time that the MEWP owner sets for
the access control operation.
▪
The green light on the keypad of the access
control unit.
▪
The main power disconnect switch.
▪
The emergency-stop button on the base control
console.
▪
The off/platform/base key switch.
You can also set these power connections to ON before
you start the access control unit.
To operate the access control unit, use the PIN code or
Smart ID card.
With the Keypad:
NOTE
This touch-sensitive keypad beeps to identify a correct
input.
1. Enter the PIN code.
2. Press the green checkmark to confirm.
▪
Result: The green light identifies an approved
ID. Start the operation.
NOTE
If you push an incorrect button when you enter the PIN
code, push the Cancel button to start again.
With the Smart ID Card:
1. Put the card in front of the reader.
2. A beep identifies that the reader read the card.
▪
Result: The green light identifies an
approved ID. Start the operation.
IMPORTANT
If the set time of the access control unit expires,
enter the PIN code or tap the Smart ID card again.
If there is a failure of the access control activation,
speak to the MEWP owner.
F
A
M
IL
IA
R
IZ
A
T
IO
N