Skyjack SJ 3215, Руководство по эксплуатации

Страница: 52 / 114

216380ACA SJ3215, SJ3219, SJ3220, SJ3226, SJ4726, SJ4732, SJ4740
52
Section 4 – Inspections Before Operation Operator’s Checklist
NOTE:
Make a copy of this page or go to www.skyjack.com for a copy that you can print.
4.4 Operator’s Checklist (page 2 of 2)
1334AA
Hydraulic and electric tray side - Do an inspection for leaks and loose,
damaged, or missing components
Pothole protection device
Hydraulic and electric tray
Hydraulic tank
Hydraulic pump and motor
Main manifold
Skycoded
TM
display panel
Platform assembly - Do an inspection for loose, damaged, or missing
components
Platform railings
Fall-protection anchorages
AC power socket
Platform control console
Manual storage box
Power deck control console (optional equipment) (SJ3220 and SJ4726 only)
Dual height control console (SJ3226 and SJ4740 only)
Lift mechanism - Do an inspection for loose, damaged, or missing compo-
nents
Sliders
Maintenance support(s)
Scissor assembly
Scissor bumpers
Rollers
Lift cylinder(s)
Angle transducer
Optional equipment and attachments - Do an inspection for leaks and
loose, damaged, or missing components
Function Tests
Do a test of the main power disconnect switch
Do a test of the control module and load sensing module self-check
Do a test of the emergency-stop button on the base
Do a test of the off/platform/base key switch
Do a test of the lower/neutral/raise switch
Do a test of the emergency-lowering function
Do a test of the freewheeling function
Do a test of the emergency-stop button on the platform
Do a test of the function-enable switch
Do a test of the steer function
Do a test of the drive function
Do a test of the anti-tiedown function
Do a test of the brakes
Do a test of the platform raise and lower functions
Do a test of the horn
Do a test of the pothole protection device
Do a test of the elevated travel speed
Do a test of the dual height control console (SJ3226 and SJ4740)
Do a test of the power deck control console (optional equipment for
SJ3220 and SJ4726)
Do a test of the SGLE switch (optional equipment)
Do a test of the flashing light (optional equipment)
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections