Skyjack 7127, Руководство по эксплуатации

Страница: 36 / 85

Mid Size & Full Size RT’s
Engine Powered February 2008
SKYJACK, Page 37
Function Tests Section 2 - Operation
2.9-3 Platform Control Console
1. Ensure emergency main power disconnect
switch is in on position.
wARNiNG
Ensure that you maintain three points
of contact when using the ladder to
mount/dismount platform.
2. Use the ladder of aerial platform to access
platform.
3. Close the gate.
4. On platform control console, pull out “ ”
emergency stop button.
Test Emergency Stop •
1. Ensure engine is running.
2. Push in “ ” emergency stop button.
Result: Engine should shut down and
aerial platform functions should not
operate.
Test Enable Trigger Switch •
1. Ensure engine is running.
2. Without activating “ ” enable trigger
switch, attempt to drive the aerial
platform.
Result: Drive functions should not
operate.
Test Platform Raising/Lowering •
wARNiNG
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Ensure engine is running.
2. Select off/lift/drive key switch to “ ” lift
position.
3. Press and hold “ ” enable pushbutton,
then select and hold raise/off/lower switch
to either “ ” raise or “ ” lower position.
Release switch to stop.
Result: Platform raising and lowering
functions should operate.
Engine Start
Pushbutton
Horn
Pushbutton
Glow Plug
Pushbutton
Lift Enable
Pushbutton
Emergency Stop
Button
Operation Light
Off/Lift/Drive Key
Switch
High/Low Torque
Switch
Raise/Lower
Switch
Low/High Throttle
Switch
Drive/Steer Controller
Rocker Switch
Enable Trigger
Switch