Skyjack 3215 SJIII Compact Series, Руководство по эксплуатации

Страница: 68 / 104

Page 68 December 2007
SJIII DC Electric
Tables Section 4
General Maintenance
Before attempting any repair work, disconnect the battery by turning the main power disconnect switch
to “ ” off position. Preventive maintenance is the easiest and least expensive type of maintenance.
Table 4.6 Maintenance and Inspection Schedule
Frequency
Daily
3 months or
150 hours
Yearly
Frequency
Daily
3 months or
150 hours
Yearly
Lifting Mechanism
Labels A Maintenance Support A
Electrical A Scissor Assembly A
Limit Switches A Scissor Bumpers A
Hydraulic A Rollers A
Entrance Side Lift Cylinder(s) A
Main Power Disconnect Switch A
Base Control Switches A Test Main Power Disconnect Switch A
Free-wheeling Value Knob A Base Control Console
Brakes A Test Base Emergency Stop A
220V Outlet Receptacle A Test Off/Platform/Base Switch A
Ladder A Test Lower/Neutral/Raise Switch A
Battery Tray Side Test Emergency Lowering A
Pothole Protection Device A Test Free-wheeling A
Battery Tray A Platform Control Console
Battery Charger A Test Platform Emergency Stop A
Battery A Test Enable Trigger Switch A
Steer Cylinder Assembly A Test Steering A
Wheel/Tire Assembly A Test Driving A
Tie Rod (Conventionals) A Test Brakes A
Greasing Points A Test Platform Raising/Lowering A
Hydraulic/Electric Tray Side Test Horn A
Pothole Protection Device A Test Pothole Sensor A
Hydraulic Tank A Test Elevated Drive Speed A
Hydraulic Pump and Motor A Test Load Sensing System A
Electrical Panel A
1010AB-AS
Proportional and Main Manifolds A
Load/Tilt Sensor A
Emergency Lowering Access Rod (If Equipped) A
Platform Assembly
A
Lanyard Attachment Anchors A
AC Outlet on Platform A
Platform Control Console A
Manuals A
Powered Extension Control Console (If Equipped) A
† - Refer to Skyjack's website @ www.skyjack.com for latest service bulletins prior to performing quarterly or yearly inspection.
B - Perform Scheduled Maintenance Inspection. Refer to Service & Maintenance manual.
* - Maintenance must be performed only by trained and competent personnel who are familiar with mechanical procedures.
B*†
Visual and Daily Maintenance Inspections
B*†
B*
†
Function Tests
A - Perform Visual and Daily Maintenance Inspections & Functions Test. Refer to Section 2.3 and Section 2.4 of this manual.
WARNING
Use original or equivalent to the original parts and components for the MEWP.
NOTE
The owner’s annual inspection decal must be completed after an annual inspection has been
completed.