Skyjack 3215 SJIII Compact Series, Руководство по эксплуатации

Страница: 49 / 104

SJIII DC Electric
December 2007 Page 49
Section 3 - Operation Guardrail Folding Procedure
3.9 Guardrail Folding Procedure
When folded down, the folding guardrail system reduces
the height of the retracted MEWP for transporting only.
WARNING
Any lowered guardrail will create a fall
hazard. Remain away from the side of
the platform while raising or lowering the
guardrails to avoid falling.
1
Entranc
e
Side
Left
Side
Right Side
Extension
Side
Extension Top Rail
Figure 3-12a. Folding Guardrail System
1. Guardrail Locking Pin with Lanyard - This pin is
used to lock the guardrail in place.
WARNING
The scissor assembly must be fully
lowered before raising or lowering the
guardrails.
WARNING
Before operating this MEWP, check the
guardrail system for loose or missing
locking pins. The guardrail system must
be upright and all pins must be locked in
place. Death or serious injury could result
if the guardrail system is not upright or
properly locked.
To fold the guardrail system down:
1. Ensure MEWP is on level ground.
2. Ensure extension platform is fully retracted.
3. Ensure Emergency Stop button is depressed.
4. Turn main power disconnect switch to “ ” off
position.
WARNING
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
5. Use the ladder of MEWP to access platform.
6. Close the gate.
7. Remove the platform control console and lay it
down on the platform.
WARNING
Any lowered guardrail will create a fall
hazard. Use caution when exiting or
entering the platform when the guardrails
are lowered.
8. Remove left and right side pins A and B (if
equipped).
(Refer to Figure 3-12b):
Pin A
Pin B (If Equipped)
Pin C
Extension Top
Rail
Figure 3-12b. Extension Top Rail Pins
WARNING
Ensure pin C is in place and secured to
the Extension Top Rail.