Skyjack 3215 SJIII Compact Series, Руководство по эксплуатации

Страница: 19 / 104

SJIII DC Electric
December 2007 Page 19
Section 2 - Familiarization Visual & Maintenance Inspection
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
• Steer Cylinder Assembly
-
Ensure steer cylinder assembly is
properly secured and there are no loose
or missing parts.
• Wheel/Tire Assembly
The MEWP is either equipped with solid
rubber tires or foam-filled tires. Tire and/or
wheel failure could result in an MEWP tip-
over. Component damage may also result if
problems are not discovered and repaired in
a timely fashion.
-
Check all tire treads and sidewalls for
cuts, cracks, punctures and unusual
wear.
-
Check each wheel for damage and
cracked welds.
-
Check each lug nut for proper torque to
ensure none are loose.
-
Check wheel motor assembly for loose
or missing parts and signs of visible
damage.
-
Ensure wheels are aligned and true
vertically and horizontally.
WARNING
Intermixing tires of different types or
using tires of types other than those
originally supplied with this equipment
can adversely affect stability. Therefore,
replace tires only with the exact Skyjack-
approved type. Failure to operate
with matched approved tires in good
condition may result in death or serious
injury.
• Tie Rod (SJIII 3220, 3226
& 46xx
)
-
Ensure there are no loose or missing
parts, tie rod end studs are locked and
there is no visible damage.
• Greasing Points
-
Ensure greasing points have no sign of
visible damage and are free from dirt and
obstructions.
FAMILIARIZA
TION
FAMILIARIZA
TION
Steer Cylinder
Tie Rod
Battery Tray
Wheel/Tire
SJIII 3220, 3226 & 46xx