http://www.SkyhawkRC.com
http://www.SkyhawkRC.com
Step 8: ground station will switch to “Control” interface automatically, at this time, flight control will save magnetic
compass data, during the process, purple LED is on(2seconds flash and 1 second off), wait a few seconds until
purple light goes out and will display 1 blue circle and 1 red circle, the calibration is completed.
excellent
qualified
unqualified
As photos above, if red and blue circles are almost in coincident, it indicates calibration is successful. If not,
please execute the operation again.
Note: if the flight control components are installed well and no disassembly, it is unnecessary to make calibration
again.
Auto Navigation
Step 1: Air line Setting
1). click “ Map” and “Tool” button
2). click “Add Waypoints” and “OK” button.
3). set waypoints on map and it will form air line automatically.
