http://www.SkyhawkRC.com
http://www.SkyhawkRC.com
GPS mode, CH6 switch to “2” , flight control will control aircraft return home and land. During return, it is not
controlled by remote control, while it returns to the height of landing point, it will land slowly, at this time, user
can adjust its landing point by remote control in order to find a more suitable landing point and throttle
controlled by flight control during landing.
Preparations Before Flight
1. Install CCS software on android mobile or tablet(we will send GCS software to user after purchase done)
2. Check remote control functions and android ground station data
1). Turn on remote control, CH5 and CH6 switch to “0” position, CH9 switches to “2” position, cut down ESC
power and connect flight control power, open Android mobile or tablet WIFI, search aircraft name “M900-XXX”,
password “54321”, start GCS software, switch to “Data” interface and check “Flight Mode” bar, check if the flight
modes are the same with remote control(according to the form between CH5 and CH6).
Flight Mode
CH5
CH6
Manual
0
X (any position)
Auto Hovering
2
0
Auto Navigation
2
1
Auto Back Landing
2
2
