30
SKYBLADE FANS -
Where Form Follows Function
9
installing MOTOR COVER
NOTE:
Motor cover and hardware are available from SkyBlade Fan Company upon request and are not included
standard.
9.4 Motor Cover Assembly
1.
Orient the motor cover so that the three ventilation slots are on top.
2.
Knock out the hole for the motor cable on the cover that is on the side of the motor electrical box.
3.
Apply the plastic bushing to the knocked out hole.
4.
Push the motor cable through the plastic bushing on the motor cover and on the motor electrical box.
5.
Finish wiring the motor cable to the motor, screw on the motor electrical box cover and tighten the
bushings.
6.
Align the slots on the motor cover to the sockets in the chassis
7.
Screw in the motor cover thumb screws and tighten with a 3/16” allen wrench.
8.
On the non-electrical side, orient the cover so that the three ventilation slots are on top again.
9.
Align the slots on the cover to the sockets on the chassis
10.
Screw in the motor cover thumb screws and tighten
with a 3/16” allen wrench.
Motor Cover Hardware (supplied):
a.
(8) 1/4”-20x5/8” Thumb Socket Cap Screw
Chassis
Assembly
Motor Cover
Thumb Screw
Motor
Cover
