WiFi Network
.. ooo Bell '9'
Cancel
�:30 PM
WiFi Network
Access Point (AP) Mode
-
Apply
C)
Tap on
WiFi Network
to bring up the WiFi options as detailed below. You
can choose either
Access Point {AP) Mode
or
Station {STA) Mode.
Use AP
mode for a basic connection to SAM. Use STA mode if you wish to control
SAM while simultaneously being connected to a wireless network (e.g., for
internet access) or want to control SAM remotely via the internet.
AP SSID
SynScanWiFi_a1281e
•
AP Security
Open
Be sure that you have the correct
STA 55/0
and
Password
information.
If you enter the incorrect information you may need to reset SAM to its
factory settings using the procedure outlined in Appendix VI.
Station (STA) Mode
Access Point (AP) Mode:
This is the default and simpler mode. In
AP
mode
SAM acts as a wireless access point so that you can connect to it via the
Star Adventurer mini Console.
AP Mode SSID:
The SSID will automatically show up based on the SSID
you entered to make your initial WiFi connection. Select it to connect your
device to SAM. Before attempting to connect be sure that SAM is powered
up and the green WiFi light is blinking. The green light signals that SAM is
ready to make a WiFi connection.
AP Mode Security:
Select
Open
if no encryption is to be used. Otherwise,
tap on the settings field and choose an encryption type from the list.
Station Mode (STA):
Choose this mode if you wish to have internet access
while using SAM, control SAM via the internet, or to save battery power.
When you select STA mode SAM will join an existing WiFi network. To use
STA Mode, select it, then set the SSID and Password for the network you
STA SSID
STA Password
IJ .
STA Use DHCP
are joining. When all of your selections are made click on
Apply.
SAM will
synscanWiFi_a12a1e
restart and join the network. The new settings will be stored in SAM's
memory and will remain there until the settings are changed.
STA SSID:
Select the network you wish to join and enter the 551 D for that
network.
STA Password:
Enter the
Password
for the network you have selected to join.
STA Use DHCP:
Turn this
off
ONLY if you want to set the IP address manually.
28
0
c - en 1 t
4.83V
••ooo Bell 9
1:30PM
Cancel
WiFi Network
Access Point (AP) Mode
AP SSID
SynScanWiFi_a1281 e
AP Security
Open
Station (STA) Mode
STA SSID
STA Password
a.
Network Troubleshooting
Apply
0
0
0
Re-establish WiFi Connection
The WiFi connection to SAM will disconnect if either the SSID or
Password is modified. If you lose your WiFi connection please follow
the procedures to reconnect your device to SAM as outlined on page 8 .
Restore SAM to Factory WiFi Settings
If you have forgotten the Password or are having trouble establishing
a WiFi connection then you may need to restore SAM to factory set
tings. Please refer to the procedures in Appendix VI: How to Restore
Factory WiFi Settings. Note: You will need to re-establish your WiFi
connection after restoring SAM to its factory WiFi settings.
Both SSID and Password are case-sensitive
STA Use DHCP
0
SynScanWiFi_a1281e
4.83V
29
