SPG 84 Installation manual
6.
•
Report disabled:
Sending message to central monitoring station
−
disabled:
−
enabled:
Factory setting: all enabled
•
E-mai Report:
Sending E-mail message from that particular zone.
−
disabled:
−
enabled:
Factory setting: all disabled
•
SMS Report:
Sending SMS message from that particular zone
−
disabled:
−
enabled:
Factory setting: all disabled
•
Name:
You may type here any text in English standard characters, it will be transmitted in E-mail and SMS.
Factory setting: all empty
•
ZT :
This is the enclosure or global tamper circuit pin. No other zonetype can be programmed to this zone input.
•
ZA:
This is the panel AC loss detection tamper pin. No other zonetype can be programmed to this zone input.
Dallas Ibutton arming / disarming registration
The SPG 84 can handle up to 8 different dallas ibuttons (type 1990) Each iButton authority level could be set.
Dallas ID
This is the hex code of the dallas iButton arming device you may read on the button.
Name
You can enter any name here. This field will be transmitted in SMS and Emails if programmed.
If an unregistered iButton is used, the panel will send an access denied report to the central station via the SPG 1000.