Sky Climber Compact 1000, Инструкция оператора

Страница: 29 / 29

January 2019 Page 29
CHECKLISTS (Continued)
CHECK DAILY or before the start of each shift:
Permanent Davits – Daily Check

Make sure davit has been inspected and tested prior to use

Make sure davit is installed per manufacturer’s instructions

Make sure capacity is equal to or greater than hoist capacity

Check fist grip torque (if used)
Counterweights – Daily Check

Must be designed for use as counterweight

Make sure they are securely attached to beam

Make sure they are made from a non-flammable material

Make sure they are labeled individually. Sky Climber counterweights are 50 lbs.
Ascertain that:

Instructions are kept with the unit at all times. Additional copies are available – contact Sky Climber.

All Warning and Rating labels are in place, legible, and have been read.

Hoist Drain Holes on the bottom are open. Fasteners checked.

Suspended Platform Hoist is connected to proper power source.

Minimum of 3 J-Clamps are used and are tight. (4 J-Clamps are required for round thimbles).

Cornice Hook, Parapet Clamps or Outriggers, and similar rigging are secured and tied back. Chokers
or similar devices are securely in place. Tie backs are tight and straight back.

Counterweights are non-flowable type, secure, and correct amount.

Roof rigging load is spread using 3/4 inch plywood. Hardwood used for Load Spreader with Parapet.

Wire rope inspected and is not kinked, bird-caged, or otherwise damaged.

The wire rope bitter end is looped and secured with a J-Clamp.

Sky Lock, Hoist Load, Controlled Descent, and Emergency Stop tests performed and acceptable.
!
WARNING
Do NOT use Sky Climber Hoists, Sky Locks, or any equipment
that is damaged or worn beyond normal tolerances.