Sky Climber Compact 1000, Инструкция оператора

Страница: 26 / 29

January 2019 Page 26
INSPECTION FREQUENCY & MAINTENANCE
Field Inspection
Inspection must be performed by a designated qualified person or operator.
Inspection Frequency
Inspect ALL equipment as follows:

When the system is reeved.

At the start of each work shift.

At least every 4 hours in abrasive, caustic, or adhesive conditions.

At least every 2 hours in freezing conditions.
Factory Inspection, Maintenance, and Testing
Return Sky Climber Hoists and Sky Lock Brakes to a Factory Authorized Service Center for
inspection, maintenance, and testing as follows:

Every 12 months in non-contaminated and non-freezing environments.

Every 6 months in contaminated or freezing environments.

After every job for gunite, hydroblasting, or sandblasting.
WIRE ROPE INSPECTION
Field Inspection
Inspection must be performed by a competent person.
Inspection Frequency
Inspect ALL wire ropes a
t the start of each work shift and after any occurrence that could affect a wire
rope’s integrity. The entire length of the wire rope should be inspected.
Wire Rope Replacement (mandatory)
Wire ropes MUST be replaced if ANY of the following conditions exist.

Any physical damage which impairs the function and/or strength of the wire rope.

Kinks that might impair the tracking and/or wrapping of the wire rope around the drum or sheave
of the hoist.

Six randomly distributed wires broken in one rope lay, or three broken wires in one strand in one
rope lay.
o
Although, OSHA regulations allow some broken wires, Sky Climber recommends that wire
rope be replaced if a single broken strand is found.
!
WARNING
Failure to comply with Periodic Inspection and Factory
Authorized Service Maintenance may result in a malfunction
and/or in serious personal injury, property damage, or death.